The process of embryo transfer |
The
day when our in-vitro embryos return back to us (to their mama !) is one of the
most exciting moments of an IVF cycle. We forget the struggles we went through
when we are admiring our microscopic babies under the microscope. Embryo
transfer is one of the rate-limiting steps in an IVF cycle and plays a pivotal
role in determining IVF success. Since the invention of IVF, major developments
have been made in ovarian stimulation protocols; the way oocytes are collected
; and in the IVF lab; but the embryo transfer method remains largely unchanged.
Embryo transfer done badly by an inexperienced doctor can change the fate of an
IVF cycle –there is a vital intangible “physician factor” involved in
determining the outcome of an IVF cycle! When different individuals perform
embryo transfer within the same ART programme , the pregnancy rate of each
doctor varies widely. This shows the importance of the embryo transfer
technique and how it determines IVF outcome. It is estimated that 30% of IVF
cycles fail because of shortcomings in this crucial procedure. What actually
happens during an embryo transfer ? Is it an easy procedure ? Will it be
painful ? Can my embryos fall out of my uterus after the transfer ? As usual
there are many questions: come let us find the answers together.
What
is an Embryo Transfer ?
Transferring
one or more embryos into the uterine cavity of the recipient is called embryo
transfer (ET). It is the final and crucial step of an IVF process. The
embryos in the IVF lab are grown usually until day 3 or day 5 in an incubator
in a petri dish. The qualities of embryos are graded by inspection under a
microscope. The top quality embryo(s) are returned back to the uterus , where
they belong ! Even though more than 90% of patients who undergo IVF reach the
embryo transfer stage , only a small percentage of them actually get pregnant.
Unfortunately, not all the embryos which are transferred to the uterus become
deeply desired babies !
How
is an embryo transfer performed ?
During
ET, the doctor puts you in the undignified lithotomy position in the operation
room, and inspects your cervix with the help of a speculum . The sticky
cervical mucus is cleared away using a moist cotton swab carefully. Then the
cervix is washed with a sterile fluid. The best embryos are then loaded into
the transfer catheter ( a long thin hollow soft sterile plastic tube) by the
embryologist in the adjoining IVF lab . He does this under the microscope, and
sucks up the embryos into the catheter by applying negative pressure with the
help of a 1 ml syringe. He brings the loaded catheter to your doctor ,
who performs the ET slowly by inserting the catheter into the uterine cavity
through the cervix; and then expelling its contents ( which consist of
the embryos floating in a microscopic drop of culture medium) by gently
pushing the barrel of the syringe. This deposits the embryos into the cavity of
your uterus. This method of transferring embryo(s) to the uterus is called
transcervical (through the cervix) embryo transfer. After transferring
the embryos , the doctor hands over the catheter to the embryologist , who then
examines it immediately under the microscope, to see whether there are any
embryo(s) retained in the catheter. If this is the case, the retained embryo(s)
are transferred back again to the recipient. An embryo transfer procedure is
normally painless, and takes only few minutes to perform. You do not need
anesthesia for this procedure. Most embryo transfers are easy but some embryo
transfers can be difficult too ! Normally your husband is allowed to stay with
you during the ET procedure , in order to hold your hand and provide you with
emotional support , so that you remain stress-free and relaxed.
Are
there any variations in the transcervical embryo transfer method ?
Transcervical
embryo transfer is performed in two ways – without ultrasound guidance
(traditional ‘clinical touch’ method) and with ultrasound guidance.
In
the traditional ‘clinical touch’ method , the catheter is positioned blindly in
the “desired position” ( about 1 to 2 cm away from the uterine fundus), by
relying on the clinician’s tactile senses. In other words the ‘clinical touch’
embryo transfer method relies on the experience of the person who transfers the
embryo ! During ultrasound-guided embryo transfer, the clinician is able to
find the appropriate position for placing the catheter and releasing the
embryos using the ultrasound scan image. During ultrasound-guided embryo
transfer , you need to have a full bladder , so that the uterus can be viewed
clearly ! It does create a lot of discomfort for the patient because the embryo
transfer procedure can cause pressure on the already full urinary bladder ! The
uterus should not be disturbed during the transfer in order to avoid uterine
contractions – if the uterus contracts, there is a danger of the embryo
being expelled from the cavity.
Is
ultrasound-guided embryo transfer better than ‘clinical touch’ method ?
As
usual , this is a hotly debated topic. There are studies which reported that
ultrasound-guided embryo transfer significantly enhanced embryo implantation
rates ; and there are studies which found no difference if the ET was done by
an experienced clinician in the absence of ultrasound guidance. This is a
decision which is best made by your doctor , based on what works best for him !
For junior doctors, an ultrasound guided transfer seems better, as they learn
how to master this procedure.
What
are trial transfers or mock embryo transfer?
Trial
transfers or dummy transfers are performed before the actual embryo transfer.
They can be done just before the ET ; or during the ovum pick-up ; or prior to
the start of the IVF cycle. During a trial transfer the doctor inserts an empty
catheter into the uterine cavity , to find the easiest passage to the cavity;
and to measure the length of the uterus and the cervical canal (uteri and
cervixes come in many different shapes and sizes !) This allows him to measure
how deep he has to insert the catheter , so that he can place the embryo at the
appropriate position inside the uterus , without disturbing the fundus. Most
embryo transfers can be performed easily , but there are some women where the
doctor finds it technically difficult to negotiate the catheter through the
cervix. In such a situation , their cervix has to be dilated to widen the
cervical canal , so that the embryo transfer catheter passes easily through the
cervix. There are women where the doctor needs to use a tenaculum to straighten
the uterine axis (remember that the cervical canal and uterus are at an angle
to each other) and sometimes the uterus is so tilted that the passage of the
catheter from the internal opening of the cervical canal into the uterus is
difficult. Sometimes pulling on the tenaculum alone cannot do the job , especially
if the uterus is acutely angulated in relation to the cervical canal. Then it
maybe necessary to curve the catheter, so it conforms to the curve of the
uterus. In these patients, using specially designed catheter sets allows the
doctor more freedom in gently guiding the catheter through the cervix.
What
factors play a role in affecting embryo transfer results ?
The
embryo transfer should be smooth and trauma-free. Many studies have shown that
the pregnancy rate after embryo transfer is better if it is performed by an
experienced physician, as compared to a newbie.
1.
Placement of the
embryo
Placing
the embryo 2 cm from the uterine fundus (the upper rounded extremity of the
uterus , above the openings of the fallopian tubes) helps in enhancing embryo
implantation. This is the region which is thought to possess maximum
implantation capacity.
2.
Uterus contraction
When
the cervix is handled roughly or if the catheter touches the uterine fundus ,
the uterus can contract. This can expel the embryos from the uterine cavity
into the fallopian tubes or cervical canal, and compromising IVF success.
3.
Cervical mucus
Carefully
removing the cervical mucus without causing trauma to the cervix improves IVF
outcome. The cervical mucus can plug the catheter tip , thus preventing the
deposition of the embryo in the uterus. It can also be a source of introducing
bacterial contamination into the otherwise sterile uterine cavity.
4.
Catheter choice
Soft
catheters have a better IVF outcome because they avoid trauma to the uterine
wall.
5.
After the doctor has done the transfer, the embryologist checks it under the
microscope. The presence
of blood in the catheter suggests that the transfer was technically
difficult – and this may reduce pregnancy rates.
6.
Trapped embryos
Sometimes
the embryos remain trapped with the catheter, even through the doctor has
plunged the barrel of the syringe completely. When the embryologist identifies
the trapped embryos in his petri dish, he simple reloads them again into a new
catheter, and the doctor can then re-transfer them . This does not seem to
affect pregnancy rates.
Why
are some embryo transfers difficult to perform ?
Some embryo transfers are difficult to perform because of the following problems in patients :
Some embryo transfers are difficult to perform because of the following problems in patients :
1.
Cervical stenosis ( narrowing) or anatomical distortion of the cervical canal
and uterus
2.
Acute utero-cervical angulations
If
a physician has several years of experience in doing IVF, then most embryo transfers
are like a cakewalk. But in some women , the embryo transfer can become an
arduous adventure because of the difficulty encountered in traversing the
cervix. This is commoner in women of Indian and African origin , where pelvic
inflammatory disease (PID) and cervical infections are more prevalent. There
can also be anatomical distortion of the cervical canal and uterus because of
previous surgery. These conditions might lead to a traumatic embryo
transfer (there might be bleeding , and the patient many experience pain) ; or
the embryo transfer cannot be performed at all. The presence of an acute
curvature between uterus and cervical canal (utero-cervical angulation) can
also make the embryo transfer hard to perform.
How
to avoid difficult embryo transfers ?
Performing
mock transfers before the actual embryo transfer helps in identifying the
problem beforehand , and can help the doctor to take precautionary measure. For
example patients with cervical stenosis can undergo a process called cervical
dilation to widen the cervical canal. This might help in the atraumatic passage
of the ET catheter into the uterine cavity.
But
there are some patients in which transcervical embryo transfer becomes
impossible ! In such rare cases , there are other techniques which could be
used to transfer the embryo to the uterus.
What
are the methods which bypass the transcervical route for embryo transfer ?
1.
Transmyometrial embryo transfer
2.
ZIFT
Transmyometrial
embryo transfer
In
this method , using a special Towako set, two needles (one inside of the other)
are passed through the vagina into the uterus wall , under ultrasound guidance,
until the needle tip reaches the edge of the endometrial lining. The inner
needle is then removed and a thin catheter is inserted inside the outer needle,
which carries the embryo into the cavity. The embryos are then released in the
endometrium. But the success rate with such embryo transfers are less when
compared to transcervical embryo transfers.
ZIFT
ZIFT
stands for zygote intrafallopian transfer. During ZIFT , cleavage stage embryos
are transferred into the fallopian tubes , instead of the uterus , using
laparoscopy. ZIFT is a very good option for women who cannot have a
transcervical embryo transfer, but who have at least one normal fallopian tube.
Since cleavage stage embryos belong to the fallopian tube and not to the uterus
, ZIFT has a higher pregnancy rate than conventional ET.
Most
clinics are not able to offer the option of doing a ZIFT , because of the lack of
surgical skills and anesthesia facilities. If your embryo transfers are
difficult, then find a clinic which offers this option !
e-SET
(elective Single Embryo Transfer)
Elective
single embryo transfer (e-SET) is becoming popular for women who are young and
have good ovarian reserve. While transferring multiple embryos improves the
pregnancy rate, it also increases the risk of multiple gestation. Children who
are a result of multiple pregnancies have an increased risk of health problems,
because of the increased risk of preterm delivery and low birth weight . With
the advent of better embryo selection strategies such as comprehensive
chromosome screening (CCS) , single embryo transfer may become the norm in the
future !
Some FAQs about embryo transfer : http://myselfishgenes.blogspot.de/2013/05/some-faqs-about-embryo-trasnfer.html
Some FAQs about embryo transfer : http://myselfishgenes.blogspot.de/2013/05/some-faqs-about-embryo-trasnfer.html
thanks!
ReplyDeleteHello,
ReplyDeleteDo you believe that performing a Towako embryo transfer might prevent the chance of placenta previa? Would not "forcing" the embryo into the upper segment lining keep the embryo from floating too low in the uterus? Thanks!
Tawako ET ? What is it, can you explain ? I am not aware of that !
DeleteManju
Ok it is transmyometrial ET, which I have discussed above (TOWAKO transfer :) It is mainly performed on patients who have cervical stenosis i.e., if their uterus is not reachable through cervix. The success rate is not as high as cervical route transfer. I have no idea whether this method have the benefits mentioned by you but if the ET can be done via cervix it is better to opt for it.
Delete